Energy-Efficient and Sustainable Electrochemical Technologies for Heavy Metal Removal and Recovery from Wastewater: A Critical Review (2000–2026)

Surinder Deswal

Department of Civil Engineering, National Institute of Technology Kurukshetra, Kurukshetra, India.

Abstract

Electrochemical methods are attracting growing interest for treating wastewater that contains heavy metals. They need few added chemicals, work at room temperature and pressure, and often allow the metal to be recovered in a usable form. How sustainable they are depends mainly on their electricity use, the rate at which electrodes are consumed and the handling of the sludge or concentrate produced, and these aspects are reported very differently from one study to the next. This review examines electrochemical methods for removing and recovering heavy metals with energy use and sustainability as the main points of comparison, using adsorption and pressure-driven membranes as reference technologies. English-language literature published between January 2000 and June 2026 was identified through a structured, targeted search of the literature. Five groups of processes are discussed: electrocoagulation, electrodeposition and electroreduction, capacitive deionization and electrosorption, electrodialysis and electrodeionization, and bioelectrochemical systems. Solar-powered systems, alternating or pulsed current operation and hybrid process trains are treated separately. For each group, the factors that control energy demand are examined, including cell voltage, current efficiency, mass transfer, electrode passivation and solution conductivity. A common way of reporting energy is proposed, based on energy per cubic metre treated, energy per kilogram of metal removed and comparison with the theoretical minimum. Alternating or pulsed current, polarity reversal, three-dimensional electrodes, membrane and flow-electrode capacitive designs and direct solar coupling have all been shown to reduce energy demand or operating cost, and bioelectrochemical cathodes can reduce some metals while producing electricity. Most studies, however, still use synthetic single-metal solutions, short batch experiments and incomplete energy accounting, and few include life cycle or cost analysis. Standard reporting, longer pilot trials on real effluents, reuse of residues and better process control are the main research needs.

Keywords: Electrocoagulation; Capacitive deionization; Specific energy consumption; Metal recovery; Bioelectrochemical systems; Circular economy

References

  1. Abdullah, N., Yusof, N., Lau, W.J., et al. (2019) ‘Recent trends of heavy metal removal from water/wastewater by membrane technologies’, Journal of Industrial and Engineering Chemistry, 76, pp. 17-38. https://doi.org/10.1016/j.jiec.2019.03.029
  2. Adhoum, N., Monser, L., Bellakhal, N., et al. (2004) ‘Treatment of electroplating wastewater containing Cu2+, Zn2+ and Cr(VI) by electrocoagulation’, Journal of Hazardous Materials, 112(3), pp. 207-213. https://doi.org/10.1016/j.jhazmat.2004.04.018
  3. Akbal, F. and Camcı, S. (2011) ‘Copper, chromium and nickel removal from metal plating wastewater by electrocoagulation’, Desalination, 269(1-3), pp. 214-222. https://doi.org/10.1016/j.desal.2010.11.001
  4. Al Aji, B., Yavuz, Y. and Koparal, A.S. (2012) ‘Electrocoagulation of heavy metals containing model wastewater using monopolar iron electrodes’, Separation and Purification Technology, 86, pp. 248-254. https://doi.org/10.1016/j.seppur.2011.11.011
  5. Albaba, M.T., Talhami, M., Omar, A., et al. (2025) ‘Machine learning-aided prediction of COD removal in the electrocoagulation process using a super learner model’, Journal of Environmental Chemical Engineering, 117469. https://doi.org/10.1016/j.jece.2025.117469
  6. Ali, D.F., Alwan, K.H., Abdullah, A., et al. (2021) ‘Using photovoltaic to remove heavy metals from industrial water’, Iraqi Journal of Industrial Research, 8(1), pp. 55-61. https://doi.org/10.53523/ijoirVol8I1ID26
  7. Alvarado, L. and Chen, A. (2014) ‘Electrodeionization: principles, strategies and applications’, Electrochimica Acta, 132, pp. 583-597. https://doi.org/10.1016/j.electacta.2014.03.165
  8. Amrose, S., Gadgil, A., Srinivasan, V., et al. (2013) ‘Arsenic removal from groundwater using iron electrocoagulation: effect of charge dosage rate’, Journal of Environmental Science and Health, Part A, 48(9), pp. 1019-1030. https://doi.org/10.1080/10934529.2013.773215
  9. Amrose, S.E., Bandaru, S.R.S., Delaire, C., et al. (2014) ‘Electro-chemical arsenic remediation: field trials in West Bengal’, Science of the Total Environment, 488-489, pp. 539-546. https://doi.org/10.1016/j.scitotenv.2013.11.074
  10. Anastas, P.T. and Zimmerman, J.B. (2003) ‘Design through the 12 principles of green engineering’, Environmental Science & Technology, 37(5), pp. 94A-101A. https://doi.org/10.1021/es032373g
  11. Anglada, Á., Urtiaga, A. and Ortiz, I. (2009) ‘Contributions of electrochemical oxidation to waste-water treatment: fundamentals and review of applications’, Journal of Chemical Technology & Biotechnology, 84(12), pp. 1747-1755. https://doi.org/10.1002/jctb.2214
  12. Arana Juve, J.-M., Christensen, F.M.S., Wang, Y., et al. (2022) ‘Electrodialysis for metal removal and recovery: a review’, Chemical Engineering Journal, 435, 134857. https://doi.org/10.1016/j.cej.2022.134857
  13. Arenas, L.F., Ponce de León, C. and Walsh, F.C. (2019) ‘Three-dimensional porous metal electrodes: fabrication, characterisation and use’, Current Opinion in Electrochemistry, 16, pp. 1-9. https://doi.org/10.1016/j.coelec.2019.02.002
  14. Arroyo, M.G., Pérez-Herranz, V., Montañés, M.T., et al. (2009) ‘Effect of pH and chloride concentration on the removal of hexavalent chromium in a batch electrocoagulation reactor’, Journal of Hazardous Materials, 169(1-3), pp. 1127-1133. https://doi.org/10.1016/j.jhazmat.2009.04.089
  15. Azimi, A., Azari, A., Rezakazemi, M., et al. (2017) ‘Removal of heavy metals from industrial wastewaters: a review’, ChemBioEng Reviews, 4(1), pp. 37-59. https://doi.org/10.1002/cben.201600010
  16. Babel, S. and Kurniawan, T.A. (2003) ‘Low-cost adsorbents for heavy metals uptake from contaminated water: a review’, Journal of Hazardous Materials, 97(1-3), pp. 219-243. https://doi.org/10.1016/S0304-3894(02)00263-7
  17. Bagchi, S. and Behera, M. (2020) ‘Assessment of heavy metal removal in different bioelectrochemical systems: a review’, Journal of Hazardous, Toxic, and Radioactive Waste, 24(3), 04020010. https://idr.iitbbs.ac.in/handle/2008/2826
  18. Bao, S., Xin, C., Zhang, Y., et al. (2023) ‘Application of capacitive deionization in water treatment and energy recovery: a review’, Energies, 16(3), 1136. https://doi.org/10.3390/en16031136
  19. Barakat, M.A. (2011) ‘New trends in removing heavy metals from industrial wastewater’, Arabian Journal of Chemistry, 4(4), pp. 361-377. https://doi.org/10.1016/j.arabjc.2010.07.019
  20. Bard, A.J. and Faulkner, L.R. (2001) Electrochemical methods: fundamentals and applications. 2nd ed. New York: John Wiley & Sons.
  21. Barrera-Díaz, C.E., Lugo-Lugo, V. and Bilyeu, B. (2012) ‘A review of chemical, electrochemical and biological methods for aqueous Cr(VI) reduction’, Journal of Hazardous Materials, 223-224, pp. 1-12. https://doi.org/10.1016/j.jhazmat.2012.04.054
  22. Bayramoglu, M., Kobya, M., Can, O.T., et al. (2004) ‘Operating cost analysis of electrocoagulation of textile dye wastewater’, Separation and Purification Technology, 37(2), pp. 117-125. https://doi.org/10.1016/j.seppur.2003.09.002
  23. Bazrafshan, E., Mohammadi, L., Ansari-Moghaddam, A., et al. (2015) ‘Heavy metals removal from aqueous environments by electrocoagulation process – a systematic review’, Journal of Environmental Health Science and Engineering, 13, 74. https://doi.org/10.1186/s40201-015-0233-8
  24. Bhatti, M.S., Reddy, A.S. and Thukral, A.K. (2009) ‘Electrocoagulation removal of Cr(VI) from simulated wastewater using response surface methodology’, Journal of Hazardous Materials, 172(2-3), pp. 839-846. https://doi.org/10.1016/j.jhazmat.2009.07.072
  25. Bian, Y., Ge, Z., Albano, C., et al. (2019) ‘Oily bilge water treatment using DC/AC powered electrocoagulation’, Environmental Science: Water Research & Technology, 5(10), pp. 1654-1660. https://doi.org/10.1039/C9EW00497A
  26. Biesheuvel, P.M. and van der Wal, A. (2010) ‘Membrane capacitive deionization’, Journal of Membrane Science, 346(2), pp. 256-262. https://doi.org/10.1016/j.memsci.2009.09.043
  27. Bolisetty, S., Peydayesh, M. and Mezzenga, R. (2019) ‘Sustainable technologies for water purification from heavy metals: review and analysis’, Chemical Society Reviews, 48(2), pp. 463-487. https://doi.org/10.1039/C8CS00493E
  28. Burakov, A.E., Galunin, E.V., Burakova, I.V., et al. (2018) ‘Adsorption of heavy metals on conventional and nanostructured materials for wastewater treatment purposes: a review’, Ecotoxicology and Environmental Safety, 148, pp. 702-712. https://doi.org/10.1016/j.ecoenv.2017.11.034
  29. Campione, A., Gurreri, L., Ciofalo, M., et al. (2018) ‘Electrodialysis for water desalination: a critical assessment of recent developments on process fundamentals, models and applications’, Desalination, 434, pp. 121-160. https://doi.org/10.1016/j.desal.2017.12.044
  30. Carmona, B. and Abejón, R. (2023) ‘Innovative membrane technologies for the treatment of wastewater polluted with heavy metals: perspective of the potential of electrodialysis, membrane distillation, and forward osmosis from a bibliometric analysis’, Membranes, 13(4), 385. https://doi.org/10.3390/membranes13040385
  31. Carolin, C.F., Kumar, P.S., Saravanan, A., et al. (2017) ‘Efficient techniques for the removal of toxic heavy metals from aquatic environment: a review’, Journal of Environmental Chemical Engineering, 5(3), pp. 2782-2799. https://doi.org/10.1016/j.jece.2017.05.029
  32. Cerrillo-Gonzalez, M.M., Villen-Guzman, M., Rodriguez-Maroto, J.M., et al. (2024) ‘Metal recovery from wastewater using electrodialysis separation’, Metals, 14(1), 38. https://doi.org/10.3390/met14010038
  33. Chaplin, B.P. (2014) ‘Critical review of electrochemical advanced oxidation processes for water treatment applications’, Environmental Science: Processes & Impacts, 16(6), pp. 1182-1203. https://doi.org/10.1039/C3EM00679D
  34. Chaplin, B.P. (2019) ‘The prospect of electrochemical technologies advancing worldwide water treatment’, Accounts of Chemical Research, 52(3), pp. 596-604. https://doi.org/10.1021/acs.accounts.8b00611
  35. Chen, G. (2004) ‘Electrochemical technologies in wastewater treatment’, Separation and Purification Technology, 38(1), pp. 11-41. https://doi.org/10.1016/j.seppur.2003.10.006
  36. Chen, J.P. and Lim, L.L. (2005) ‘Recovery of precious metals by an electrochemical deposition method’, Chemosphere, 60(10), pp. 1384-1392. https://doi.org/10.1016/j.chemosphere.2005.02.008
  37. Chen, R., Sheehan, T., Ng, J.L., et al. (2020) ‘Capacitive deionization and electrosorption for heavy metal removal’, Environmental Science: Water Research & Technology, 6(2), pp. 258-282. https://doi.org/10.1039/C9EW00945K
  38. Choi, C. and Cui, Y. (2012) ‘Recovery of silver from wastewater coupled with power generation using a microbial fuel cell’, Bioresource Technology, 107, pp. 522-525. https://doi.org/10.1016/j.biortech.2011.12.058
  39. Comninellis, C. and Chen, G. (2010) Electrochemistry for the environment. 1st ed. New York: Springer.
  40. Corominas, Ll., Foley, J., Guest, J.S., et al. (2013) ‘Life cycle assessment applied to wastewater treatment: state of the art’, Water Research, 47(15), pp. 5480-5492. https://doi.org/10.1016/j.watres.2013.06.049
  41. Delaire, C., Amrose, S., Zhang, M., et al. (2017) ‘How do operating conditions affect As(III) removal by iron electrocoagulation?’, Water Research, 112, pp. 185-194. https://doi.org/10.1016/j.watres.2017.01.030
  42. Demirbas, E. and Kobya, M. (2017) ‘Operating cost and treatment of metalworking fluid wastewater by chemical coagulation and electrocoagulation processes’, Process Safety and Environmental Protection, 105, pp. 79-90. https://doi.org/10.1016/j.psep.2016.10.013
  43. Dermentzis, K. (2010) ‘Removal of nickel from electroplating rinse waters using electrostatic shielding electrodialysis/electrodeionization’, Journal of Hazardous Materials, 173(1-3), pp. 647-652. https://doi.org/10.1016/j.jhazmat.2009.08.133
  44. Dermentzis, K., Marmanis, D. and Christoforidis, A. (2014) ‘Remediation of heavy metal bearing wastewater by photovoltaic electrocoagulation’, Water Resources and Wetlands Conference (Water 2014). Tulcea, Romania, pp. 257-263. https://www.limnology.ro/water2014/proceedings/34_Dermentzis.pdf
  45. Długołęcki, P. and van der Wal, A. (2013) ‘Energy recovery in membrane capacitive deionization’, Environmental Science & Technology, 47(9), pp. 4904-4910. https://doi.org/10.1021/es3053202
  46. Elawadly, R., Shahbabaei, M., Cúñez, F.D., et al. (2025) ‘Effects of electrode/electrolyte materials on heavy-metal removal in industrial wastewater with flow capacitive deionization method’, Separation and Purification Technology, 356(Part B), 130036. https://www.sciencedirect.com/science/article/pii/S1383586624037754
  47. Elimelech, M. and Phillip, W.A. (2011) ‘The future of seawater desalination: energy, technology, and the environment’, Science, 333(6043), pp. 712-717. https://doi.org/10.1126/science.1200488
  48. Emamjomeh, M.M. and Sivakumar, M. (2009) ‘Review of pollutants removed by electrocoagulation and electrocoagulation/flotation processes’, Journal of Environmental Management, 90(5), pp. 1663-1679. https://doi.org/10.1016/j.jenvman.2008.12.011
  49. Escobar, C., Soto-Salazar, C. and Toral, M.I. (2006) ‘Optimization of the electrocoagulation process for the removal of copper, lead and cadmium in natural waters and simulated wastewater’, Journal of Environmental Management, 81(4), pp. 384-391. https://doi.org/10.1016/j.jenvman.2005.11.012
  50. Espinoza-Quiñones, F.R., Fornari, M.M.T., Módenes, A.N., et al. (2009) ‘Pollutant removal from tannery effluent by electrocoagulation’, Chemical Engineering Journal, 151(1-3), pp. 59-65. https://doi.org/10.1016/j.cej.2009.01.043
  51. Eyvaz, M., Kirlaroglu, M., Aktas, T.S., et al. (2009) ‘The effects of alternating current electrocoagulation on dye removal from aqueous solutions’, Chemical Engineering Journal, 153(1-3), pp. 16-22. https://doi.org/10.1016/j.cej.2009.05.028
  52. Fan, C.-S., Tseng, S.-C., Li, K.-C., et al. (2016) ‘Electro-removal of arsenic(III) and arsenic(V) from aqueous solutions by capacitive deionization’, Journal of Hazardous Materials, 312, pp. 208-215. https://doi.org/10.1016/j.jhazmat.2016.03.055
  53. Fei, Y. and Hu, Y.H. (2023) ‘Recent progress in removal of heavy metals from wastewater: a comprehensive review’, Chemosphere, 335, 139077. https://doi.org/10.1016/j.chemosphere.2023.139077
  54. Fu, F. and Wang, Q. (2011) ‘Removal of heavy metal ions from wastewaters: a review’, Journal of Environmental Management, 92(3), pp. 407-418. https://doi.org/10.1016/j.jenvman.2010.11.011
  55. Gabelich, C.J., Tran, T.D. and Suffet, I.H. (2002) ‘Electrosorption of inorganic salts from aqueous solution using carbon aerogels’, Environmental Science & Technology, 36(13), pp. 3010-3019. https://doi.org/10.1021/es0112745
  56. Gao, P., Chen, X., Shen, F., et al. (2005) ‘Removal of chromium(VI) from wastewater by combined electrocoagulation–electroflotation without a filter’, Separation and Purification Technology, 43(2), pp. 117-123. https://doi.org/10.1016/j.seppur.2004.10.008
  57. Garcia-Segura, S., Eiband, M.M.S.G., de Melo, J.V., et al. (2017) ‘Electrocoagulation and advanced electrocoagulation processes: a general review about the fundamentals, emerging applications and its association with other technologies’, Journal of Electroanalytical Chemistry, 801, pp. 267-299. https://doi.org/10.1016/j.jelechem.2017.07.047
  58. Gomes, J.A.G., Daida, P., Kesmez, M., et al. (2007) ‘Arsenic removal by electrocoagulation using combined Al–Fe electrode system and characterization of products’, Journal of Hazardous Materials, 139(2), pp. 220-231. https://doi.org/10.1016/j.jhazmat.2005.11.108
  59. Goyal, H. and Mondal, P. (2026) ‘Techno-economic and life cycle assessment of an integrated electrocoagulation process for sustainable treatment of arsenic and fluoride contaminated groundwater’, Environmental Science: Water Research & Technology, 12(1), pp. 211-226. https://doi.org/10.1039/D5EW00519A
  60. Grimshaw, P., Calo, J.M. and Hradil, G. (2011) ‘Cyclic electrowinning/precipitation (CEP) system for the removal of heavy metal mixtures from aqueous solutions’, Chemical Engineering Journal, 175, pp. 103-109. https://doi.org/10.1016/j.cej.2011.09.059
  61. Gusenbauer, M. and Haddaway, N.R. (2020) ‘Which academic search systems are suitable for systematic reviews or meta-analyses? Evaluating retrieval qualities of Google Scholar, PubMed, and 26 other resources’, Research Synthesis Methods, 11(2), pp. 181-217. https://doi.org/10.1002/jrsm.1378
  62. Haddaway, N.R., Macura, B., Whaley, P., et al. (2018) ‘ROSES RepOrting standards for Systematic Evidence Syntheses: pro forma, flow-diagram and descriptive summary of the plan and conduct of environmental systematic reviews and systematic maps’, Environmental Evidence, 7, 7. https://doi.org/10.1186/s13750-018-0121-7
  63. Hakizimana, J.N., Gourich, B., Chafi, M., et al. (2017) ‘Electrocoagulation process in water treatment: a review of electrocoagulation modeling approaches’, Desalination, 404, pp. 1-21. https://doi.org/10.1016/j.desal.2016.10.011
  64. Heidmann, I. and Calmano, W. (2008) ‘Removal of Zn(II), Cu(II), Ni(II), Ag(I) and Cr(VI) present in aqueous solutions by aluminium electrocoagulation’, Journal of Hazardous Materials, 152(3), pp. 934-941. https://doi.org/10.1016/j.jhazmat.2007.07.068
  65. Holt, P.K., Barton, G.W. and Mitchell, C.A. (2005) ‘The future for electrocoagulation as a localised water treatment technology’, Chemosphere, 59(3), pp. 355-367. https://doi.org/10.1016/j.chemosphere.2004.10.023
  66. Hou, C.-H. and Huang, C.-Y. (2013) ‘A comparative study of electrosorption selectivity of ions by activated carbon electrodes in capacitive deionization’, Desalination, 314, pp. 124-129. https://doi.org/10.1016/j.desal.2012.12.029
  67. Hua, M., Zhang, S., Pan, B., et al. (2012) ‘Heavy metal removal from water/wastewater by nanosized metal oxides: a review’, Journal of Hazardous Materials, 211-212, pp. 317-331. https://doi.org/10.1016/j.jhazmat.2011.10.016
  68. Huang, L., Chen, J., Quan, X., et al. (2010) ‘Enhancement of hexavalent chromium reduction and electricity production from a biocathode microbial fuel cell’, Bioprocess and Biosystems Engineering, 33(8), pp. 937-945. https://doi.org/10.1007/s00449-010-0417-7
  69. Huang, Z., Lu, L., Cai, Z., et al. (2016) ‘Individual and competitive removal of heavy metals using capacitive deionization’, Journal of Hazardous Materials, 302, pp. 323-331. https://doi.org/10.1016/j.jhazmat.2015.09.064
  70. Hunsom, M., Pruksathorn, K., Damronglerd, S., et al. (2005) ‘Electrochemical treatment of heavy metals (Cu2+, Cr6+, Ni2+) from industrial effluent and modeling of copper reduction’, Water Research, 39(4), pp. 610-616. https://doi.org/10.1016/j.watres.2004.10.011
  71. Hussin, F. (2018) Solar powered electrocoagulation processes for Pb(II) removal using novel electrode materials and configurations. PhD thesis, University of Malaya, Kuala Lumpur. https://knova.um.edu.my/student_works_2010s/5474
  72. ISO (2006) Environmental management – Life cycle assessment – Principles and framework. ISO 14040:2006, International Organization for Standardization, Geneva. https://www.iso.org/standard/37456.html
  73. Issabayeva, G., Aroua, M.K. and Sulaiman, N.M. (2006) ‘Electrodeposition of copper and lead on palm shell activated carbon in a flow-through electrolytic cell’, Desalination, 194(1-3), pp. 192-201. https://doi.org/10.1016/j.desal.2005.10.031
  74. Jain, A., Rai, S., Srinivas, R., et al. (2022) ‘Bioinspired modeling and biogeography-based optimization of electrocoagulation parameters for enhanced heavy metal removal’, Journal of Cleaner Production, 338, 130622. http://hdl.handle.net/10576/43854
  75. Jaishankar, M., Tseten, T., Anbalagan, N., et al. (2014) ‘Toxicity, mechanism and health effects of some heavy metals’, Interdisciplinary Toxicology, 7(2), pp. 60-72. https://doi.org/10.2478/intox-2014-0009
  76. Jande, Y.A.C. and Kim, W.S. (2013) ‘Desalination using capacitive deionization at constant current’, Desalination, 329, pp. 29-34. https://doi.org/10.1016/j.desal.2013.08.023
  77. Järup, L. (2003) ‘Hazards of heavy metal contamination’, British Medical Bulletin, 68(1), pp. 167-182. https://doi.org/10.1093/bmb/ldg032
  78. Juang, R.-S. and Shiau, R.-C. (2000) ‘Metal removal from aqueous solutions using chitosan-enhanced membrane filtration’, Journal of Membrane Science, 165(2), pp. 159-167. https://doi.org/10.1016/S0376-7388(99)00235-5
  79. Jüttner, K., Galla, U. and Schmieder, H. (2000) ‘Electrochemical approaches to environmental problems in the process industry’, Electrochimica Acta, 45(15-16), pp. 2575-2594. https://doi.org/10.1016/S0013-4686(00)00339-X
  80. Kabdaşlı, I., Arslan-Alaton, I., Ölmez-Hancı, T., et al. (2012) ‘Electrocoagulation applications for industrial wastewaters: a critical review’, Environmental Technology Reviews, 1(1), pp. 2-45. https://doi.org/10.1080/21622515.2012.715390
  81. Keshmirizadeh, E., Yousefi, S. and Rofouei, M.K. (2011) ‘An investigation on the new operational parameter effective in Cr(VI) removal efficiency: a study on electrocoagulation by alternating pulse current’, Journal of Hazardous Materials, 190(1-3), pp. 119-124. https://doi.org/10.1016/j.jhazmat.2011.03.010
  82. Khan, S.U., Khalid, M., Hashim, K., et al. (2023) ‘Efficacy of electrocoagulation treatment for the abatement of heavy metals: an overview of critical processing factors, kinetic models and cost analysis’, Sustainability, 15(2), 1708. https://doi.org/10.3390/su15021708
  83. Kim, K., Cotty, S., Elbert, J., et al. (2020a) ‘Asymmetric redox-polymer interfaces for electrochemical reactive separations: synergistic capture and conversion of arsenic’, Advanced Materials, 32(6), 1906877. https://doi.org/10.1002/adma.201906877
  84. Kim, T., Kim, T.-K. and Zoh, K.-D. (2020b) ‘Removal mechanism of heavy metal (Cu, Ni, Zn, and Cr) in the presence of cyanide during electrocoagulation using Fe and Al electrodes’, Journal of Water Process Engineering, 33, 101109. https://doi.org/10.1016/j.jwpe.2019.101109
  85. Kobya, M., Can, O.T. and Bayramoglu, M. (2003) ‘Treatment of textile wastewaters by electrocoagulation using iron and aluminum electrodes’, Journal of Hazardous Materials, 100(1-3), pp. 163-178. https://doi.org/10.1016/S0304-3894(03)00102-X
  86. Kobya, M., Demirbas, E., Parlak, N.U., et al. (2010) ‘Treatment of cadmium and nickel electroplating rinse water by electrocoagulation’, Environmental Technology, 31(13), pp. 1471-1481. https://doi.org/10.1080/09593331003713693
  87. Kobya, M., Ulu, F., Gebologlu, U., et al. (2011) ‘Treatment of potable water containing low concentration of arsenic with electrocoagulation: different connection modes and Fe–Al electrodes’, Separation and Purification Technology, 77(3), pp. 283-293. https://doi.org/10.1016/j.seppur.2010.12.018
  88. Kumar, P.R., Chaudhari, S., Khilar, K.C., et al. (2004) ‘Removal of arsenic from water by electrocoagulation’, Chemosphere, 55(9), pp. 1245-1252. https://doi.org/10.1016/j.chemosphere.2003.12.025
  89. Kuokkanen, V., Kuokkanen, T., Rämö, J., et al. (2013) ‘Recent applications of electrocoagulation in treatment of water and wastewater – a review’, Green and Sustainable Chemistry, 3(2), pp. 89-121. https://doi.org/10.4236/gsc.2013.32013
  90. Kurniawan, T.A., Chan, G.Y.S., Lo, W.H., et al. (2006) ‘Physico-chemical treatment techniques for wastewater laden with heavy metals’, Chemical Engineering Journal, 118(1-2), pp. 83-98. https://doi.org/10.1016/j.cej.2006.01.015
  91. Lakshmanan, D., Clifford, D.A. and Samanta, G. (2009) ‘Ferrous and ferric ion generation during iron electrocoagulation’, Environmental Science & Technology, 43(10), pp. 3853-3859. https://doi.org/10.1021/es8036669
  92. Landaburu-Aguirre, J., García, V., Pongrácz, E., et al. (2009) ‘The removal of zinc from synthetic wastewaters by micellar-enhanced ultrafiltration: statistical design of experiments’, Desalination, 240(1-3), pp. 262-269. https://doi.org/10.1016/j.desal.2007.12.041
  93. Lee, J., Kim, S., Kim, C., et al. (2014) ‘Hybrid capacitive deionization to enhance the desalination performance of capacitive techniques’, Energy & Environmental Science, 7(11), pp. 3683-3689. https://doi.org/10.1039/C4EE02378A
  94. Leovac Maćerak, A., Duduković, N., Kiss, F., et al. (2024) ‘Electrocoagulation in treatment of municipal wastewater – life cycle impact assessment’, Chemosphere, 355, 141701. https://doi.org/10.1016/j.chemosphere.2024.141701
  95. Li, H., Zou, L., Pan, L., et al. (2010) ‘Novel graphene-like electrodes for capacitive deionization’, Environmental Science & Technology, 44(22), pp. 8692-8697. https://doi.org/10.1021/es101888j
  96. Li, Z., Zhang, X. and Lei, L. (2008) ‘Electricity production during the treatment of real electroplating wastewater containing Cr6+ using microbial fuel cell’, Process Biochemistry, 43(12), pp. 1352-1358. https://doi.org/10.1016/j.procbio.2008.08.005
  97. Liu, C., Hsu, P.-C., Xie, J., et al. (2017a) ‘A half-wave rectified alternating current electrochemical method for uranium extraction from seawater’, Nature Energy, 2, 17007. https://doi.org/10.1038/nenergy.2017.7
  98. Liu, C., Wu, T., Hsu, P.-C., et al. (2019) ‘Direct/alternating current electrochemical method for removing and recovering heavy metal from water using graphene oxide electrode’, ACS Nano, 13(6), pp. 6431-6437. https://doi.org/10.1021/acsnano.8b09301
  99. Liu, P., Yan, T., Shi, L., et al. (2017b) ‘Graphene-based materials for capacitive deionization’, Journal of Materials Chemistry A, 5(27), pp. 13907-13943. https://doi.org/10.1039/C7TA02243C
  100. Liu, S.-H., Liu, J.-S. and Lin, C.-W. (2024) ‘Heavy metal removal and recovery from contaminated sediments based on bioelectrochemical systems: insights, progress, and perspectives’, International Biodeterioration & Biodegradation, 105940. https://doi.org/10.1016/j.ibiod.2024.105940
  101. Logan, B.E. (2008) Microbial fuel cells. 1st ed. Hoboken, NJ: John Wiley & Sons.
  102. Logan, B.E. and Rabaey, K. (2012) ‘Conversion of wastes into bioelectricity and chemicals by using microbial electrochemical technologies’, Science, 337(6095), pp. 686-690. https://doi.org/10.1126/science.1217412
  103. Logan, B.E., Hamelers, B., Rozendal, R., et al. (2006) ‘Microbial fuel cells: methodology and technology’, Environmental Science & Technology, 40(17), pp. 5181-5192. https://doi.org/10.1021/es0605016
  104. Lu, J., Li, Y., Yin, M., et al. (2015) ‘Removing heavy metal ions with continuous aluminum electrocoagulation: a study on back mixing and utilization rate of electro-generated Al ions’, Chemical Engineering Journal, 267, pp. 86-92. https://doi.org/10.1016/j.cej.2015.01.011
  105. Mao, X., Hong, S., Zhu, H., et al. (2008) ‘Alternating pulse current in electrocoagulation for wastewater treatment to prevent the passivation of Al electrode’, Journal of Wuhan University of Technology – Materials Science Edition, 23(2), pp. 239-241. https://doi.org/10.1007/s11595-006-2239-7
  106. Mao, Y., Zhao, Y. and Cotterill, S. (2023) ‘Examining current and future applications of electrocoagulation in wastewater treatment’, Water, 15(8), 1455. https://doi.org/10.3390/w15081455
  107. Martín-Martín, A., Orduna-Malea, E., Thelwall, M., et al. (2018) ‘Google Scholar, Web of Science, and Scopus: a systematic comparison of citations in 252 subject categories’, Journal of Informetrics, 12(4), pp. 1160-1177. https://doi.org/10.1016/j.joi.2018.09.002
  108. Mechelhoff, M., Kelsall, G.H. and Graham, N.J.D. (2013) ‘Electrochemical behaviour of aluminium in electrocoagulation processes’, Chemical Engineering Science, 95, pp. 301-312. https://doi.org/10.1016/j.ces.2013.03.050
  109. Merzouk, B., Gourich, B., Sekki, A., et al. (2009) ‘Removal turbidity and separation of heavy metals using electrocoagulation–electroflotation technique: a case study’, Journal of Hazardous Materials, 164(1), pp. 215-222. https://doi.org/10.1016/j.jhazmat.2008.07.144
  110. Meunier, N., Drogui, P., Montané, C., et al. (2006) ‘Comparison between electrocoagulation and chemical precipitation for metals removal from acidic soil leachate’, Journal of Hazardous Materials, 137(1), pp. 581-590. https://doi.org/10.1016/j.jhazmat.2006.02.050
  111. Mir, N. and Bicer, Y. (2021) ‘Integration of electrodialysis with renewable energy sources for sustainable freshwater production: a review’, Journal of Environmental Management, 289, 112496. https://doi.org/10.1016/j.jenvman.2021.112496
  112. Modin, O., Wang, X., Wu, X., et al. (2012) ‘Bioelectrochemical recovery of Cu, Pb, Cd, and Zn from dilute solutions’, Journal of Hazardous Materials, 235-236, pp. 291-297. https://doi.org/10.1016/j.jhazmat.2012.07.058
  113. Mohammadi, T., Moheb, A., Sadrzadeh, M., et al. (2005) ‘Modeling of metal ion removal from wastewater by electrodialysis’, Separation and Purification Technology, 41(1), pp. 73-82. https://doi.org/10.1016/j.seppur.2004.04.007
  114. Mohan, D. and Pittman, C.U. (2006) ‘Activated carbons and low cost adsorbents for remediation of tri- and hexavalent chromium from water’, Journal of Hazardous Materials, 137(2), pp. 762-811. https://doi.org/10.1016/j.jhazmat.2006.06.060
  115. Mohan, D. and Pittman, C.U. (2007) ‘Arsenic removal from water/wastewater using adsorbents – a critical review’, Journal of Hazardous Materials, 142(1-2), pp. 1-53. https://doi.org/10.1016/j.jhazmat.2007.01.006
  116. Mohsen-Nia, M., Montazeri, P. and Modarress, H. (2007) ‘Removal of Cu2+ and Ni2+ from wastewater with a chelating agent and reverse osmosis processes’, Desalination, 217(1-3), pp. 276-281. https://doi.org/10.1016/j.desal.2006.01.043
  117. Mollah, M.Y.A., Morkovsky, P., Gomes, J.A.G., et al. (2004) ‘Fundamentals, present and future perspectives of electrocoagulation’, Journal of Hazardous Materials, 114(1-3), pp. 199-210. https://doi.org/10.1016/j.jhazmat.2004.08.009
  118. Mollah, M.Y.A., Schennach, R., Parga, J.R., et al. (2001) ‘Electrocoagulation (EC) – science and applications’, Journal of Hazardous Materials, 84(1), pp. 29-41. https://doi.org/10.1016/S0304-3894(01)00176-5
  119. Mouedhen, G., Feki, M., De Petris-Wery, M., et al. (2009) ‘Electrochemical removal of Cr(VI) from aqueous media using iron and aluminum as electrode materials: towards a better understanding of the involved phenomena’, Journal of Hazardous Materials, 168(2-3), pp. 983-991. https://doi.org/10.1016/j.jhazmat.2009.02.117
  120. Mouedhen, G., Feki, M., Wery, M.D.P., et al. (2008) ‘Behavior of aluminum electrodes in electrocoagulation process’, Journal of Hazardous Materials, 150(1), pp. 124-135. https://doi.org/10.1016/j.jhazmat.2007.04.090
  121. Moussa, D.T., El-Naas, M.H., Nasser, M., et al. (2017) ‘A comprehensive review of electrocoagulation for water treatment: potentials and challenges’, Journal of Environmental Management, 186, pp. 24-41. https://doi.org/10.1016/j.jenvman.2016.10.032
  122. Nancharaiah, Y.V., Venkata Mohan, S. and Lens, P.N.L. (2015) ‘Metals removal and recovery in bioelectrochemical systems: a review’, Bioresource Technology, 195, pp. 102-114. https://doi.org/10.1016/j.biortech.2015.06.058
  123. Nidheesh, P.V. and Singh, T.S.A. (2017) ‘Arsenic removal by electrocoagulation process: recent trends and removal mechanism’, Chemosphere, 181, pp. 418-432. https://doi.org/10.1016/j.chemosphere.2017.04.082
  124. Oren, Y. (2008) ‘Capacitive deionization (CDI) for desalination and water treatment – past, present and future (a review)’, Desalination, 228(1-3), pp. 10-29. https://doi.org/10.1016/j.desal.2007.08.005
  125. Ortiz, J.M., Expósito, E., Gallud, F., et al. (2006) ‘Photovoltaic electrodialysis system for brackish water desalination: modeling of global process’, Journal of Membrane Science, 274(1-2), pp. 138-149. https://doi.org/10.1016/j.memsci.2005.08.006
  126. Ouzzani, M., Hammady, H., Fedorowicz, Z., et al. (2016) ‘Rayyan – a web and mobile app for systematic reviews’, Systematic Reviews, 5, 210. https://doi.org/10.1186/s13643-016-0384-4
  127. Ozaki, H., Sharma, K. and Saktaywin, W. (2002) ‘Performance of an ultra-low-pressure reverse osmosis membrane (ULPROM) for separating heavy metal: effects of interference parameters’, Desalination, 144(1-3), pp. 287-294. https://doi.org/10.1016/S0011-9164(02)00329-6
  128. Oztekin, Y. and Yazicigil, Z. (2006) ‘Recovery of metals from complexed solutions by electrodeposition’, Desalination, 190(1-3), pp. 79-88. https://doi.org/10.1016/j.desal.2005.07.016
  129. Page, M.J., McKenzie, J.E., Bossuyt, P.M., et al. (2021) ‘The PRISMA 2020 statement: an updated guideline for reporting systematic reviews’, BMJ, 372, n71. https://doi.org/10.1136/bmj.n71
  130. Parga, J.R., Cocke, D.L., Valenzuela, J.L., et al. (2005) ‘Arsenic removal via electrocoagulation from heavy metal contaminated groundwater in La Comarca Lagunera México’, Journal of Hazardous Materials, 124(1-3), pp. 247-254. https://doi.org/10.1016/j.jhazmat.2005.05.017
  131. Pasta, M., Wessells, C.D., Cui, Y., et al. (2012) ‘A desalination battery’, Nano Letters, 12(2), pp. 839-843. https://doi.org/10.1021/nl203889e
  132. Pelarti, M.M. and Mirbagheri, S.A. (2022) ‘Nickel removal from aqueous solutions using flow-electrode capacitive deionization (optimization by response surface methodology (RSM))’, Water Science and Technology, 86(6), pp. 1299-1307. https://doaj.org/article/de5d9d7bb0274cd3b1be20b88066a3a6
  133. Pines Pozo, M.T., Lopez Fernandez, E., Villaseñor, J., et al. (2025) ‘Metal recovery from wastes: a review of recent advances in the use of bioelectrochemical systems’, Applied Sciences, 15(3), 1456. https://doi.org/10.3390/app15031456
  134. Pociecha, M. and Lestan, D. (2010) ‘Using electrocoagulation for metal and chelant separation from washing solution after EDTA leaching of Pb, Zn and Cd contaminated soil’, Journal of Hazardous Materials, 174(1-3), pp. 670-678. https://doi.org/10.1016/j.jhazmat.2009.09.103
  135. Porada, S., Zhao, R., van der Wal, A., et al. (2013) ‘Review on the science and technology of water desalination by capacitive deionization’, Progress in Materials Science, 58(8), pp. 1388-1442. https://doi.org/10.1016/j.pmatsci.2013.03.005
  136. Pullin, A.S., Frampton, G.K., Livoreil, B., et al. (2022) Guidelines and standards for evidence synthesis in environmental management. Version 5.1, Collaboration for Environmental Evidence. https://environmentalevidence.org/information-for-authors/
  137. Qasem, N.A.A., Mohammed, R.H. and Lawal, D.U. (2021) ‘Removal of heavy metal ions from wastewater: a comprehensive and critical review’, npj Clean Water, 4, 36. https://doi.org/10.1038/s41545-021-00127-0
  138. Qin, M., Deshmukh, A., Epsztein, R., et al. (2019) ‘Comparison of energy consumption in desalination by capacitive deionization and reverse osmosis’, Desalination, 455, pp. 100-114. https://doi.org/10.1016/j.desal.2019.01.003
  139. Rabaey, K. and Verstraete, W. (2005) ‘Microbial fuel cells: novel biotechnology for energy generation’, Trends in Biotechnology, 23(6), pp. 291-298. https://doi.org/10.1016/j.tibtech.2005.04.005
  140. Radjenovic, J. and Sedlak, D.L. (2015) ‘Challenges and opportunities for electrochemical processes as next-generation technologies for the treatment of contaminated water’, Environmental Science & Technology, 49(19), pp. 11292-11302. https://doi.org/10.1021/acs.est.5b02414
  141. Randolph, J.J. (2005) ‘Free-marginal multirater kappa (multirater κfree): an alternative to Fleiss’ fixed-marginal multirater kappa’, Joensuu Learning and Instruction Symposium 2005. Joensuu, Finland.
  142. Rodríguez-Valadez, F., Ortiz-Éxiga, C., Ibanez, J.G., et al. (2005) ‘Electroreduction of Cr(VI) to Cr(III) on reticulated vitreous carbon electrodes in a parallel-plate reactor with recirculation’, Environmental Science & Technology, 39(6), pp. 1875-1879. https://doi.org/10.1021/es049091g
  143. Ruotolo, L.A.M. and Gubulin, J.C. (2005) ‘A factorial-design study of the variables affecting the electrochemical reduction of Cr(VI) at polyaniline-modified electrodes’, Chemical Engineering Journal, 110(1-3), pp. 113-121. https://doi.org/10.1016/j.cej.2005.03.022
  144. Sadrzadeh, M., Mohammadi, T., Ivakpour, J., et al. (2009) ‘Neural network modeling of Pb2+ removal from wastewater using electrodialysis’, Chemical Engineering and Processing: Process Intensification, 48(8), pp. 1371-1381. https://doi.org/10.1016/j.cep.2009.07.002
  145. Sahu, O., Mazumdar, B. and Chaudhari, P.K. (2014) ‘Treatment of wastewater by electrocoagulation: a review’, Environmental Science and Pollution Research, 21(4), pp. 2397-2413. https://doi.org/10.1007/s11356-013-2208-6
  146. Sayed, E.T., Abdelkareem, M.A., Al Radi, M., et al. (2023) ‘Recent progress on the application of capacitive deionization for wastewater treatment’, Journal of Water Process Engineering, 104379. https://doi.org/10.1016/j.jwpe.2023.104379
  147. Schwarzenbach, R.P., Egli, T., Hofstetter, T.B., et al. (2010) ‘Global water pollution and human health’, Annual Review of Environment and Resources, 35, pp. 109-136. https://doi.org/10.1146/annurev-environ-100809-125342
  148. Shafaei, A., Rezayee, M., Arami, M., et al. (2010) ‘Removal of Mn2+ ions from synthetic wastewater by electrocoagulation process’, Desalination, 260(1-3), pp. 23-28. https://doi.org/10.1016/j.desal.2010.05.013
  149. Shahedi, A., Darban, A.K., Taghipour, F., et al. (2020) ‘A review on industrial wastewater treatment via electrocoagulation processes’, Current Opinion in Electrochemistry, 22, pp. 154-169. https://doi.org/10.1016/j.coelec.2020.05.009
  150. Shannon, M.A., Bohn, P.W., Elimelech, M., et al. (2008) ‘Science and technology for water purification in the coming decades’, Nature, 452(7185), pp. 301-310. https://doi.org/10.1038/nature06599
  151. Shrestha, R., Ban, S., Devkota, S., et al. (2021) ‘Technological trends in heavy metals removal from industrial wastewater: a review’, Journal of Environmental Chemical Engineering, 9(4), 105688. https://doi.org/10.1016/j.jece.2021.105688
  152. Sillanpää, M. and Shestakova, M. (2017) Electrochemical water treatment methods: fundamentals, methods and full scale applications. 1st ed. Oxford: Butterworth-Heinemann.
  153. Sirés, I., Brillas, E., Oturan, M.A., et al. (2014) ‘Electrochemical advanced oxidation processes: today and tomorrow. A review’, Environmental Science and Pollution Research, 21(14), pp. 8336-8367. https://doi.org/10.1007/s11356-014-2783-1
  154. Smedley, P.L. and Kinniburgh, D.G. (2002) ‘A review of the source, behaviour and distribution of arsenic in natural waters’, Applied Geochemistry, 17(5), pp. 517-568. https://doi.org/10.1016/S0883-2927(02)00018-5
  155. Sordello, R., Ratel, O., Flamerie De Lachapelle, F., et al. (2020) ‘Evidence of the impact of noise pollution on biodiversity: a systematic map’, Environmental Evidence, 9, 20. https://doi.org/10.1186/s13750-020-00202-y
  156. Srimuk, P., Su, X., Yoon, J., et al. (2020) ‘Charge-transfer materials for electrochemical water desalination, ion separation and the recovery of elements’, Nature Reviews Materials, 5(7), pp. 517-538. https://doi.org/10.1038/s41578-020-0193-1
  157. Strathmann, H. (2010) ‘Electrodialysis, a mature technology with a multitude of new applications’, Desalination, 264(3), pp. 268-288. https://doi.org/10.1016/j.desal.2010.04.069
  158. Su, X. (2020) ‘Electrochemical separations for metal recycling’, The Electrochemical Society Interface, 29(3), pp. 55-61. https://doi.org/10.1149/2.F08203IF
  159. Su, X. and Hatton, T.A. (2017) ‘Redox-electrodes for selective electrochemical separations’, Advances in Colloid and Interface Science, 244, pp. 6-20. https://doi.org/10.1016/j.cis.2016.09.001
  160. Su, X., Kushima, A., Halliday, C., et al. (2018) ‘Electrochemically-mediated selective capture of heavy metal chromium and arsenic oxyanions from water’, Nature Communications, 9, 4701. https://doi.org/10.1038/s41467-018-07159-0
  161. Suss, M.E., Porada, S., Sun, X., et al. (2015) ‘Water desalination via capacitive deionization: what is it and what can we expect from it?’, Energy & Environmental Science, 8(8), pp. 2296-2319. https://doi.org/10.1039/C5EE00519A
  162. Tang, W., He, D., Zhang, C., et al. (2017) ‘Comparison of Faradaic reactions in capacitive deionization (CDI) and membrane capacitive deionization (MCDI) water treatment processes’, Water Research, 120, pp. 229-237. https://doi.org/10.1016/j.watres.2017.05.009
  163. Tao, H.-C., Liang, M., Li, W., et al. (2011) ‘Removal of copper from aqueous solution by electrodeposition in cathode chamber of microbial fuel cell’, Journal of Hazardous Materials, 189(1-2), pp. 186-192. https://doi.org/10.1016/j.jhazmat.2011.02.018
  164. Tchounwou, P.B., Yedjou, C.G., Patlolla, A.K., et al. (2012) ‘Heavy metal toxicity and the environment’. In: Molecular, clinical and environmental toxicology, Experientia Supplementum, vol. 101; Luch, A. (ed.). Basel: Springer. https://doi.org/10.1007/978-3-7643-8340-4_6
  165. Tekinalp, Ö., Zimmermann, P., Holdcroft, S., et al. (2023) ‘Cation exchange membranes and process optimizations in electrodialysis for selective metal separation: a review’, Membranes, 13(6), 566. https://doi.org/10.3390/membranes13060566
  166. ter Heijne, A., Liu, F., van der Weijden, R., et al. (2010) ‘Copper recovery combined with electricity production in a microbial fuel cell’, Environmental Science & Technology, 44(11), pp. 4376-4381. https://doi.org/10.1021/es100526g
  167. Timmes, T.C., Kim, H.-C. and Dempsey, B.A. (2010) ‘Electrocoagulation pretreatment of seawater prior to ultrafiltration: pilot-scale applications for military water purification systems’, Desalination, 250(1), pp. 6-13. https://doi.org/10.1016/j.desal.2009.03.021
  168. Tran, T.-K., Chiu, K.-F., Lin, C.-Y., et al. (2017) ‘Electrochemical treatment of wastewater: selectivity of the heavy metals removal process’, International Journal of Hydrogen Energy, 42(45), pp. 27741-27748. https://doi.org/10.1016/j.ijhydene.2017.05.156
  169. Valero, D., Ortiz, J.M., Expósito, E., et al. (2008) ‘Electrocoagulation of a synthetic textile effluent powered by photovoltaic energy without batteries: direct connection behaviour’, Solar Energy Materials and Solar Cells, 92(3), pp. 291-297. https://doi.org/10.1016/j.solmat.2007.09.006
  170. van Genuchten, C.M., Addy, S.E.A., Peña, J., et al. (2012) ‘Removing arsenic from synthetic groundwater with iron electrocoagulation: an Fe and As K-edge EXAFS study’, Environmental Science & Technology, 46(2), pp. 986-994. https://doi.org/10.1021/es201913a
  171. Vardhan, K.H., Kumar, P.S. and Panda, R.C. (2019) ‘A review on heavy metal pollution, toxicity and remedial measures: current trends and future perspectives’, Journal of Molecular Liquids, 290, 111197. https://doi.org/10.1016/j.molliq.2019.111197
  172. Vasudevan, S., Lakshmi, J. and Sozhan, G. (2011) ‘Effects of alternating and direct current in electrocoagulation process on the removal of cadmium from water’, Journal of Hazardous Materials, 192(1), pp. 26-34. https://doi.org/10.1016/j.jhazmat.2011.04.081
  173. Walsh, F.C. (2001) ‘Electrochemical technology for environmental treatment and clean energy conversion’, Pure and Applied Chemistry, 73(12), pp. 1819-1837. https://doi.org/10.1351/pac200173121819
  174. Walsh, F.C., Arenas, L.F., Ponce de León, C., et al. (2016) ‘The continued development of reticulated vitreous carbon as a versatile electrode material: structure, properties and applications’, Electrochimica Acta, 215, pp. 566-591. https://doi.org/10.1016/j.electacta.2016.08.103
  175. Wan, W., Pepping, T.J., Banerji, T., et al. (2011) ‘Effects of water chemistry on arsenic removal from drinking water by electrocoagulation’, Water Research, 45(1), pp. 384-392. https://doi.org/10.1016/j.watres.2010.08.016
  176. Wang, G., Huang, L. and Zhang, Y. (2008) ‘Cathodic reduction of hexavalent chromium [Cr(VI)] coupled with electricity generation in microbial fuel cells’, Biotechnology Letters, 30(11), pp. 1959-1966. https://doi.org/10.1007/s10529-008-9792-4
  177. Wang, H. and Ren, Z.J. (2014) ‘Bioelectrochemical metal recovery from wastewater: a review’, Water Research, 66, pp. 219-232. https://doi.org/10.1016/j.watres.2014.08.013
  178. Wang, H., Zhai, P., Long, X., et al. (2023) ‘Research progress on using biological cathodes in microbial fuel cells for the treatment of wastewater containing heavy metals’, Frontiers in Microbiology, 14, 1270431. https://doi.org/10.3389/fmicb.2023.1270431
  179. Wang, J. and Chen, C. (2009) ‘Biosorbents for heavy metals removal and their future’, Biotechnology Advances, 27(2), pp. 195-226. https://doi.org/10.1016/j.biotechadv.2008.11.002
  180. Wang, Z. and He, Z. (2020) ‘Frontier review on metal removal in bioelectrochemical systems: mechanisms, performance, and perspectives’, Journal of Hazardous Materials Letters, 1, 100002. https://doi.org/10.1016/j.hazl.2020.100002
  181. Werber, J.R., Osuji, C.O. and Elimelech, M. (2016) ‘Materials for next-generation desalination and water purification membranes’, Nature Reviews Materials, 1, 16018. https://doi.org/10.1038/natrevmats.2016.18
  182. WHO (2022) Guidelines for drinking-water quality: fourth edition incorporating the first and second addenda. World Health Organization, Geneva. https://www.who.int/publications/i/item/9789240045064
  183. Wu, X., Xie, W., Ye, J., et al. (2023) ‘Progress in heavy metals-containing wastewater treatment via microbial electrolysis cell: a review’, Journal of Water Process Engineering, 104228. https://doi.org/10.1016/j.jwpe.2023.104228
  184. Xu, Y., Zhong, Z., Zeng, X., et al. (2023) ‘Novel materials for heavy metal removal in capacitive deionization’, Applied Sciences, 13(9), 5635. https://doi.org/10.3390/app13095635
  185. Yang, L., Hu, W., Chang, Z., et al. (2021) ‘Electrochemical recovery and high value-added reutilization of heavy metal ions from wastewater: recent advances and future trends’, Environment International, 152, 106512. https://doi.org/10.1016/j.envint.2021.106512
  186. Yang, Z.-H., Xu, H.-Y., Zeng, G.-M., et al. (2015) ‘The behavior of dissolution/passivation and the transformation of passive films during electrocoagulation: influences of initial pH, Cr(VI) concentration, and alternating pulsed current’, Electrochimica Acta, 153, pp. 149-158. https://doi.org/10.1016/j.electacta.2014.11.185
  187. Zhang, C., He, D., Ma, J., et al. (2018) ‘Faradaic reactions in capacitive deionization (CDI) – problems and possibilities: a review’, Water Research, 128, pp. 314-330. https://doi.org/10.1016/j.watres.2017.10.024
  188. Zhang, C., Jiang, Y., Li, Y., et al. (2013) ‘Three-dimensional electrochemical process for wastewater treatment: a general review’, Chemical Engineering Journal, 228, pp. 455-467. https://doi.org/10.1016/j.cej.2013.05.033
  189. Zhang, J., Li, J., Ma, C., et al. (2021) ‘High-efficiency and energy-saving alternating pulse current electrocoagulation to remove polyvinyl alcohol in wastewater’, RSC Advances, 11(63), pp. 40085-40099. https://doi.org/10.1039/D1RA08093H
  190. Zhao, R., Porada, S., Biesheuvel, P.M., et al. (2013) ‘Energy consumption in membrane capacitive deionization for different water recoveries and flow rates, and comparison with reverse osmosis’, Desalination, 330, pp. 35-41. https://doi.org/10.1016/j.desal.2013.08.017

Rajshahi Medical College and University of Rajshahi, BANGLADESH.



Royal Melbourne Institute of Technology (RMIT), Melbourne, AUSTRALIA.




Agri. Services, Islamabad Model College for Girls, and Riphah International University, PAKISTAN.




Kampala International University, UGANDA; Rivers State University, NIGERIA.