Green, Lean, and Digital: Repositioning Lean Six Sigma for Sustainability Transitions

Okechukwu Chiedu Ezeanym1, Charles Chikwendu Okpala2, Chukwudi Emeka Udu3

1 Associate Professor, Industrial/Production Engineering Department, Nnamdi Azikiwe University, Awka, Nigeria. 

2 Professor, Industrial/Production Engineering Department, Nnamdi Azikiwe University, Awka, Nigeria.

3 Researcher, Industrial/Production Engineering Department, Nnamdi Azikiwe University, Awka, Nigeria.

Abstract

Lean Six Sigma (LSS) has long been associated with improvements in efficiency, quality, and cost performance across manufacturing and service sectors. However, its traditional emphasis on economic and defect-based metrics constrains its effectiveness in addressing contemporary sustainability and digitalization challenges. This article introduces Green–Lean–Digital Six Sigma (GLDSS), a data-driven and multidisciplinary repositioning of LSS that systematically integrates environmental sustainability indicators and digital analytics into the DMAIC improvement cycle. Drawing on a multi-sector dataset of 42 improvement projects across manufacturing, healthcare, and energy-intensive services, the study empirically evaluates the operational and sustainability impacts of GLDSS using a quasi-experimental design. The results demonstrate statistically significant and concurrent improvements in operational performance and environmental outcomes, including reductions of 18–32% in energy intensity, 16–29% in carbon intensity, 14–27% in material waste, and 9–15% in process cycle time, while maintaining or improving sigma levels. The findings further show that higher levels of digital enablement amplify sustainability gains. Through the embedding of sustainability metrics as core performance variables and leveraging Industry 4.0 technologies for advanced analytics and control, GLDSS provides a replicable methodological framework for data-driven sustainability transitions. The study contributes to the literature by reframing Lean Six Sigma as a sustainability transition mechanism and offers actionable insights for organizations that seek scalable pathways for the integration of operational excellence with environmental sustainability.     

Keywords: Lean Six Sigma, Sustainability transitions, Digital transformation, Green operations, Industry 4.0, Data analytics, Operational excellence

References

  1. Ajaefobi, J.O. and Okpala, C.C. (2026) ‘Six Sigma in the era of Industry 4.0: A bibliometric and benchmarking review’, International Journal of Engineering Research and Development, 22(3), pp. 71-84. https://www.ijerd.com/paper/vol22-issue3/22037184.pdf
  2. Angrist, J.D. and Pischke, J.-S. (2009) Mostly harmless econometrics: An empiricist’s companion. Princeton: Princeton University Press.
  3. Antony, J. (2014) ‘Lean Six Sigma for higher education institutions (HEIs): Challenges, barriers, success factors, tools/techniques’, International Journal of Productivity and Performance Management, 63(2), pp. 257-264. https://doi.org/10.1108/IJPPM-04-2013-0067
  4. Cherrafi, A., Garza-Reyes, J.A., Kumar, V., et al. (2017) ‘Lean, green practices and process innovation: A model for green supply chain performance’, International Journal of Production Economics, 189, pp. 26-39. https://doi.org/10.1016/j.ijpe.2017.04.005
  5. Chukwumuanya, E.O., Okpala, C.C. and Udu, C.E. (2025a) ‘Lean principles integration with digital technologies: A synergistic approach to modern manufacturing’, International Journal of Industrial and Production Engineering, 3(2), pp. 59-73. https://journals.unizik.edu.ng/ijipe/article/view/6006/5197
  6. Chukwumuanya, E.O., Okpala, C.C. and Udu, C.E. (2025b) ‘Carbon accounting at the shop-floor: The integration of real-time energy monitoring, process modeling and LCA for net-zero targets’, Jurnal Teknik Indonesia, 4(1), pp. 28-41. https://jurnal.seaninstitute.or.id/index.php/juti/article/view/728
  7. Chukwunedum, O.C., Okpala, C.C. and Udu, C.E. (2026) ‘A data-driven integration of total productive maintenance and Industry 4.0 technologies: A machine learning framework for predictive OEE optimization’, International Journal of Engineering Research and Development, 22(3), pp. 85-95. https://www.ijerd.com/paper/vol22-issue3/22038595.pdf
  8. Daily, B.F. and Huang, S. (2001) ‘Achieving sustainability through attention to human resource factors in environmental management’, International Journal of Operations and Production Management, 21(12), pp. 1539-1552. https://doi.org/10.1108/01443570110410892
  9. Deswal, S. and Deswal, P. (2025) ‘Sustainability: Greenhouse Gas Protocol and global GHG emissions’ status and trends’, International Journal of Multidisciplinary Research and Growth Evaluation, 6(1), pp. 2051-2063. https://doi.org/10.54660/.IJMRGE.2025.6.1.2051-2063
  10. Elkington, J. (1997) Cannibals with forks: The triple bottom line of 21st century business. Oxford: Capstone.
  11. Ezeanyim, O.C., Okpala, C.C. and Udu, C.E. (2026) ‘Artificial intelligence-enabled Lean Six Sigma: A multi-industry longitudinal analysis of operational performance and sustainable digital transformation’, International Journal of Technology, Health and Sustainability, 2(2), pp. 428-439. https://ijths.com/wp-content/uploads/IJTHS-0202001.pdf
  12. Frank, A.G., Dalenogare, L.S. and Ayala, N.F. (2019) ‘Industry 4.0 technologies: Implementation patterns in manufacturing companies’, International Journal of Production Economics, 210, pp. 15-26. https://doi.org/10.1016/j.ijpe.2019.01.004
  13. Garza-Reyes, J.A. (2015) ‘Lean and green–a systematic review of the state-of-the-art literature’, Journal of Cleaner Production, 102, pp. 18-29. https://doi.org/10.1016/j.jclepro.2015.04.064
  14. Geels, F.W. (2002) ‘Technological transitions as evolutionary reconfiguration processes: A multi-level perspective’, Research Policy, 31(8-9), pp. 1257-1274. https://doi.org/10.1016/S0048-7333(02)00062-8
  15. Hart, S.L. and Dowell, G. (2011) ‘A natural-resource-based view of the firm: Fifteen years after’, Journal of Management, 37(5), pp. 1464-1479. https://doi.org/10.1177/0149206310390219
  16. Huppes, G. and Ishikawa, M. (2005) ‘A framework for quantified eco-efficiency analysis’, Journal of Industrial Ecology, 9(4), pp. 25-41. https://doi.org/10.1162/108819805775247882
  17. Igbokwe, N.C., Nwamekwe, C.O. and Okpala, C.C. (2026) ‘Manufacturing waste reduction through data-driven process optimization: Evidence from smart production systems’, International Journal of Technology, Health and Sustainability, 2(1), pp. 165-174. https://ijths.com/wp-content/uploads/IJTHS-020167.pdf
  18. Igbokwe, N.C., Okpala, C.C. and Nwamekwe, C.O. (2024a) ‘Industry 4.0 implementation: A paradigm shift in manufacturing’, Journal of Inventive Engineering and Technology, 6(1), pp. 20-26. https://jiengtech.com/index.php/INDEX/article/view/113/135
  19. Igbokwe, N.C., Okpala, C.C. and Nwamekwe, C.O. (2024b) ‘The implementation of Internet of Things in the manufacturing industry: An appraisal’, International Journal of Engineering Research and Development, 20(7), pp. 510-516. https://www.ijerd.com/paper/vol20-issue7/2007510516.pdf
  20. ISO (2018) ISO 14008: Monetary valuation of environmental impacts and related environmental aspects. International Organization for Standardization.
  21. Kagermann, H., Wahlster, W. and Helbig, J. (2013) Recommendations for implementing the strategic initiative INDUSTRIE 4.0. acatech.
  22. Klassen, R.D. and Vereecke, A. (2012) ‘Social issues in supply chains: Capabilities link responsibility, risk, and performance’, International Journal of Production Economics, 140(1), pp. 103-115. https://doi.org/10.1016/j.ijpe.2012.01.021
  23. Köhler, J., Geels, F.W., Kern, F., et al. (2019) ‘An agenda for sustainability transitions research: State of the art and future directions’, Environmental Innovation and Societal Transitions, 31, pp. 1-32. https://doi.org/10.1016/j.eist.2019.01.004
  24. Markard, J., Raven, R. and Truffer, B. (2012) ‘Sustainability transitions: An emerging field of research and its prospects’, Research Policy, 41(6), pp. 955-967. https://doi.org/10.1016/j.respol.2012.02.013
  25. Molnar, C. (2020) Interpretable machine learning. London: Lulu.com.
  26. Montabon, F., Pagell, M. and Wu, Z. (2016) ‘Making sustainability sustainable’, Journal of Supply Chain Management, 52(2), pp. 11-27. https://doi.org/10.1111/jscm.12103
  27. Nguyen, T.X., Luu, Q. M., Do, M.H., et al., (2026) ‘Analysis of CO2 emissions and energy efficiency potential of data centers in Vietnam’, International Journal of Technology, Health and Sustainability, 2(2), pp. 421-427. https://ijths.com/wp-content/uploads/IJTHS-0202003.pdf 
  28. Ogbodo, I.F., Okpala, C.C. and Egwuagu, O.M. (2026) ‘From Lean waste to measurable sustainability: Data-driven optimization in smart manufacturing’, International Journal of Technology, Health and Sustainability, 2(2), pp. 523-532. https://ijths.com/wp-content/uploads/IJTHS-0202020.pdf
  29. Okpala, C.C. and Udu, C.E. (2026) ‘What drives successful Six Sigma implementation? A data-driven multidisciplinary analysis’, International Journal of Technology, Health and Sustainability, 2(2), pp. 721-730. https://ijths.com/wp-content/uploads/IJTHS-0202048.pdf
  30. Okpala, C.C., Ezeanyim, O.C., Onukwuli, S.K., et al. (2026) ‘From Kaizen to digital continuous improvement: Linking Lean practices with sustainability metrics’, International Journal of Technology, Health and Sustainability, 2(1), pp. 300-310. https://ijths.com/wp-content/uploads/IJTHS-020188.pdf
  31. Okpala, C.C., Udu, C.E. and Chukwumuanya, E.O. (2025) ‘Lean 4.0: The enhancement of Lean practices with smart technologies’, International Journal of Engineering and Modern Technology, 11(6), pp. 160-173. https://doi.org/10.56201/ijemt.vol.11.no6.2025.pg160.173
  32. Okpala, S.C. and Okpala, C.C. (2026a) ‘Data-driven Lean Six Sigma for complex systems: The integration of artificial intelligence for quality, resilience, and sustainability’, International Journal of Technology, Health and Sustainability, 2(2), pp. 612-623. https://ijths.com/wp-content/uploads/IJTHS-0202030.pdf
  33. Okpala, S.C. and Okpala, C.C. (2026b) ‘Six Sigma implementation success factors across manufacturing, healthcare, and services: A large-scale multidisciplinary analysis’, International Journal of Technology, Health and Sustainability, 2(1), pp. 311-321. https://ijths.com/wp-content/uploads/IJTHS-020189.pdf
  34. Onukwuli, S.K., Okpala, C.C. and Udu, C.E. (2025) ‘The role of additive manufacturing in advancing Lean production system’, International Journal of Latest Technology in Engineering, Management and Applied Science, 14(3), pp. 179-188. https://doi.org/10.51583/IJLTEMAS.2025.140300022
  35. Pagell, M. and Shevchenko, A. (2014) ‘Why research in sustainable supply chain management should have no future’, Journal of Supply Chain Management, 50(1), pp. 44-55. https://doi.org/10.1111/jscm.12037
  36. Pagell, M. and Wu, Z. (2009) ‘Building a more complete theory of sustainable supply chain management using case studies of 10 exemplars’, Journal of Supply Chain Management, 45(2), pp. 37-56. https://doi.org/10.1111/j.1745-493X.2009.03162.x
  37. Porter, M.E. and Kramer, M.R. (2011) ‘Creating shared value’, Harvard Business Review, 89(1-2), pp. 62-77.
  38. Porter, M.E. and van der Linde, C. (1995) ‘Toward a new conception of the environment–competitiveness relationship’, Journal of Economic Perspectives, 9(4), pp. 97-118. https://doi.org/10.1257/jep.9.4.97
  39. Snee, R.D. (2010) ‘Lean Six Sigma—Getting better all the time’, International Journal of Lean Six Sigma, 1(1), pp. 9-29. https://doi.org/10.1108/20401461011033130
  40. Sony, M. and Naik, S. (2020) ‘Key ingredients for evaluating Industry 4.0 readiness for organizations: A literature review’, Benchmarking: An International Journal, 27(7), pp. 2213-2232. https://doi.org/10.1108/BIJ-09-2018-0284
  41. Sony, M., Antony, J. and Douglas, J.A. (2020) ‘Essential ingredients for Lean Six Sigma’, The TQM Journal, 32(4), pp. 689-712. https://doi.org/10.1108/TQM-03-2019-0076
  42. Stock, T., Obenaus, M., Kunz, S., et al. (2018) ‘Industry 4.0 as enabler for a sustainable development: A qualitative assessment of its ecological and social potential’, Process Safety and Environmental Protection, 118, pp. 254-267. https://doi.org/10.1016/j.psep.2018.06.026
  43. Tao, F., Zhang, H., Liu, A. and Nee, A.Y.C. (2019) ‘Digital twin in industry: State-of-the-art’, IEEE Transactions on Industrial Informatics, 15(4), pp. 2405-2415. https://doi.org/10.1109/TII.2018.2873186
  44. Udu, C.E., Ejichukwu, E.O. and Okpala, C.C. (2025) ‘The application of digital tools for supply chain optimization’, International Journal of Multidisciplinary Research and Growth Evaluation, 6(3), pp. 308-316. https://www.allmultidisciplinaryjournal.com/uploads/archives/20250508172828_MGE-2025-3-047.1.pdf
  45. UN (2015) Transforming our world: The 2030 agenda for sustainable development. United Nations.
  46. Wofuru-Nyenke, O.K. (2026) ‘Multi-Criteria Decision Analysis for Optimal Production Schedule Choice’, International Journal of Technology, Health and Sustainability, 2(2), pp. 533-539. https://ijths.com/wp-content/uploads/IJTHS-0202022.pdf 


Rajshahi Medical College and University of Rajshahi, BANGLADESH.



Royal Melbourne Institute of Technology (RMIT), Melbourne, AUSTRALIA.




Agri. Services, Islamabad Model College for Girls, and Riphah International University, PAKISTAN.




Kampala International University, UGANDA; Rivers State University, NIGERIA.